Ribbon 3D Printed Shade & Milky Wilma LED

€225.00
(ex. shipping)

Ribbon is a 3D-printed shade made from recycled plastic PET bottles.
Ribbon makes the most of the possibilities of 3D printing, featuring a fluid surface that bends over itself to surround and protect the Wilma.

The vertical lines that run through the shade, combined with the horizontal layers associated with 3D-printing, create the appearance of a textile wrapped around light. The gap allows you to peek in to take the full form of the beautiful Wilma LED bulb.

The Ribbon is perfect for kitchen counters, dining tables, living rooms, bedrooms, hotels, bars, restaurants and anywhere you need atmospheric light and a well-lit surface. It comes in black and white, but if you have a special product that needs a special colour then get in touch. Ribbon is designed by BOLD as part of the Plumen x Batch.Works collaboration.


Ribbon Shade
  • Made to order: Printed by Batch.works in the UK
  • Made from recycled PET bottles
  • Dimensions: 282mm wide x 282mm deep x 172 mm high
  • Total weight: 1.1kg
  • Available in bespoke colours dependant on volume
  • Recycle at end of life: Please recycle shade with your normal plastic recycling when finished with product. For pendant and bulb, please see our recycling page

Milky Wilma Bulb
  • Lifetime: 15,000 hours
  • Fitting: E27 Screw
  • Dimensions: 150mm (d) x 150mm (w) x 175mm (h)
  • Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
  • 4.5 Watt
  • 250 lumen
  • Equivalent to a 21W bulb
  • Colour Temperature: 2700k (Warm White Light)
  • 230v see ‘Country Compatibility’ tab
Pendant
  • Screw Fitting (E27)
  • Fabric Cable
  • Cable Length: 2 metres
  • Holder cover and Ceiling Rose
  • Material: Metal Lamp Holder
  • Diameter: 65mm (w) x 60mm (h)
  • Ceiling Rose dimensions: 65mm (w) x 60mm (h)
The bulb is available in 230V with a E27 screw fitting and is not compatible with the following countries:
  • American Samoa
  • Anguilla
  • Aruba
  • Bahamas
  • Barbados
  • Belize (unless you have a 230V supply)
  • Bermuda Bolivia (unless you have a 230V supply)
  • Brazil (unless you have a 230V supply)
  • Canada
  • Cayman Islands
  • Colombia
  • Costa Rica
  • Cuba (unless you have a 230V supply)
  • Dominican Republic
  • Ecuador
  • El Salvador
  • Guam
  • Guatemala
  • Haiti
  • Honduras
  • Japan
  • Liberia
  • Libya
  • Mexico
  • Micronesia
  • Morocco (unless you have a 230V supply)
  • Netherlands
  • Antilles (unless you have a 230V supply)
  • Nicaragua
  • Palmyra Atoll
  • Panama
  • Puerto Rica
  • Saudi Arabia (unless you have a 230V supply)
  • Suriname
  • Taiwan
  • Trinidad & Tobago
  • USA
  • Venezuela
  • Virgin Islands

If in doubt, please email us at plumen@plumen.com

Full Specifications Ribbon Shade

  • Made to order: Printed by Batch.works in the UK
  • Made from recycled PET bottles
  • Dimensions: 282mm wide x 282mm deep x 172 mm high
  • Total weight: 1.1kg
  • Available in bespoke colours dependant on volume
  • Put in standard plastic recycling bin when finished

Milky Wilma Bulb
  • Lifetime: 15,000 hours
  • Fitting: E27 Screw
  • Dimensions: 150mm (d) x 150mm (w) x 175mm (h)
  • Dimmable: Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
  • 4.5 Watt
  • 250 lumen
  • Equivalent to a 21W bulb
  • Colour Temperature: 2700k (Warm White Light)
  • 230v - see ‘Country Compatibility’ tab
  • Energy Efficiency Label A
  • Suitable for use in damp locations
  • >0°C Operation
  • Not for use in totally enclosed luminaires
  • Switching Cycles: >100,000
  • Warm-Up Time: Instant full light
  • Lamp Current: 20mA
  • Colour Rendering > 90
  • Material: Glass and Aluminium
  • Once your bulb reaches the end of its lifetime, please click here for more information on recycling 
  • Full spec sheet can be found here

    Pendant
    • Screw Fitting (E27)
    • Fabric Cable
    • Cable Length: 2 metres
    • Lamp Holder cover and Ceiling Rose Material: Metal
    • Lamp Holder Diameter: 65mm (w) x 60mm (h)
    • Ceiling Rose dimensions: 65mm (w) x 60mm (h)
    • Class 1 luminaire
    • 40W max.
    • A rated-lamps only
    • Not suitable for covering
    • Dry location only
    • Suitable for use indoors only
    • Voltage: 220-240V 50/60Hz
    • The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
    • Full spec sheet can be found here

    read more