Kayan XL with 001 - 3D printed shade by Formaliz3d

white
blue
yellow
grey
red
black

€175.00
(inc. VAT) (ex. shipping)

This product ships mid-September.

Kayan lamp shade is the result of an inspired collaboration between Plumen and Italian 3D printing design specialist, Formaliz3d.

Using 3D modelling and printing, Kayan is specially designed to fit Plumen bulbs.

Its powerful simplicity of soft, sinuous shapes perfectly complements the curved silhouettes of the bulbs. The punctured sides also let the bulb’s unique silhouette shine through whilst keeping the full brightness of the light projected onto surfaces below.

The shade comes included with a Plumen 001 light bulb.

This item will be sent directly from the manufacturer and delivery may take up to 12 working days.

read more

Shade

  • Shade Material: ABS plastic
  • Dimensions: 250mm x 150mm x 150mm
  • Fabric Cable
  • Cable length: 1.50m 

    Original Plumen 001

    Designed by HULGER and Samuel Wilkinson

    • Fitting: E27
    • 15 Watt
    • 820Lumen
    • Equivalent to 65 W Incandescent Light bulb
    • Rated Wattage: 15W
    • Lamp current: 118mA
    • CRI: >80
    • Product Code: 1201011501
      • North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries are compatible only with the 230V (E27) version. For a list of the requirements of each country in the world, please click the 'Country Compatibility' tab. The 120V (E26) version is sold on the US shop.
      • For a full list of technical specifications please click on the tab "Full specification".

      The Kayan is sold with the 230V version only (E27).

      The following countries require the 120V version:

      • American Samoa
      • Anguilla
      • Aruba
      • Bahamas
      • Barbados
      • Belize (unless you have a 230V supply)
      • Bermuda
      • Bolivia (unless you have a 230V supply)
      • Brazil (unless you have a 230V supply)
      • Canada
      • Cayman Islands
      • Colombia
      • Costa Rica
      • Cuba (unless you have a 230V supply)
      • Dominican Republic
      • Ecuador
      • El Salvador
      • Guam
      • Guatemala
      • Haiti
      • Honduras
      • Japan
      • Liberia
      • Libya
      • Mexico
      • Micronesia
      • Morocco (unless you have a 230V supply)
      • Netherlands Antilles (unless you have a 230V supply)
      • Nicaragua
      • Palmyra Atoll
      • Panama
      • Puerto Rica
      • Saudi Arabia (unless you have a 230V supply)
      • Suriname
      • Taiwan
      • Trinidad & Tobago
      • USA
      • Venezuela
      • Virgin Islands

      All other countries require the 230V version of the bulb. If in doubt, please email us at plumen@plumen.com

      Shade

      • Shade Material: ABS plastic
      • Dimensions: 250mm x 150mm x 150mm
      • Cable length: 1.50m 
      • Plumen bulb only, 11W max

      Original Plumen 001

      • Screw Cap (E27)
      • Lifetime: 8,000 Hours
      • Non-dimmable: Do not use in dimmers
      • Colour Temperature 2700K (warm white light)
      • Use in dry location only
      • Not for use in totally enclosed luminaires
      • Lamp dimensions: 192mm x 100mm x 91mm
      • Energy Label A
      • Switching Cycles: More than 30,000
      • Warm-Up Time: Less than 30 seconds
      • Starting time: 180ms
      • Mercury Content: Less than 2.5mg
      • Luminous Flux: 820 Lumen
      • Lumen Maintenance: 82% after 6,000 hours
      • Rated Wattage: 15W
      • Lamp current: 118mA
      • CRI: >80
      • Power Factor: 0.59
      • Product Specification Sheet available here 
      • In case of breakage, please click here to ensure safe disposal.
      • Once your Plumen 001 has reached the end of its lifetime, please click here to learn more about recycling information.
      read more