The Original Plumen 001 and Plumen 002 LED come in two versions 120V or 230V. For 120V (E26) version please visit the US shop.

The following countries require the 120V version:

• American Samoa
• Anguilla
• Aruba
• Bahamas
• Barbados
• Belize (unless you have a 230V supply)
• Bermuda
• Bolivia (unless you have a 230V supply)
• Brazil (unless you have a 230V supply)
• Canada
• Cayman Islands
• Colombia
• Costa Rica
• Cuba (unless you have a 230V supply)
• Dominican Republic
• Ecuador
• El Salvador
• Guam
• Guatemala
• Haiti
• Honduras
• Japan
• Liberia
• Libya
• Mexico
• Micronesia
• Morocco (unless you have a 230V supply)
• Netherlands Antilles (unless you have a 230V supply)
• Nicaragua
• Palmyra Atoll
• Panama
• Puerto Rica
• Saudi Arabia (unless you have a 230V supply)
• Suriname
• Taiwan
• Trinidad & Tobago
• USA
• Venezuela
• Virgin Islands

All other countries require the 230V version of the Plumen 001. If in doubt, please email us at plumen@plumen.com

Ceiling Rose:

• 4-way multi-port ceiling rose with mounting bracket
• Comes with Wago Connector Blocks included.
• Suitable for use with all Plumen pendants, shades and bulbs. Requires an E27 Extender to be compatible with WattNott bulbs - please contact info@plumen.com for further information.
• Each port has a maximum load of 2kg
• Cord grips included
• Weight 393g
• Height 55mm
• Diameter 160mm

Spacers: 

• Bar Diameter: 7mm
• Cable to cable length: 333mm
• Material: Steel and Aluminium
• Weight (per bar): 50g
• Colours: Copper, Brass, Black, White
• Assembled External Diameter: 350mm 

Shade:

• Mouth-blown glass shade with fitting
• Dimensions: 293mm high x 250mm diameter
• Weight: 1kg
• Material: Glass and plastic
• Painted finish
• Product Specification Sheet available here 

Pendant:

• Fabric Cable
• Cable Length: 2 metres
• Ceiling Rose Material: Metal
• Ceiling Rose Diameter: 55mm

• Ceiling Rose Height: 50mm
• Drop Cap Material: Metal
• Drop Cap Diameter: 53mm at widest point
• Drop Cap Height: 99mm
• Class 1 luminaire
• Plumen only, 15W max
• The luminaire is sold with a bulb of the energy class: A
• A rated-lamps only
• Not suitable for covering
• Dry location only
• Suitable for use indoors only
• Voltage: 100-240V 50 /60Hz
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
• Product Specification Sheet available here 

Light Bulb - Original 001

• Lifetime: 8,000 Hours
• Non-dimmable: Do not use in dimmers
• Colour Temperature 2700K (warm white light)
• Use in dry location only
• Not for use in totally enclosed luminaires
• Lamp dimensions: 192mm x 100mm x 91mm
• Energy Label A
• Switching Cycles: More than 30,000
• Warm-Up Time: Less than 30 seconds
• Starting time: 180ms
• Mercury Content: Less than 2.5mg
• Luminous Flux: 820 Lumen
• Lumen Maintenance: 82% after 6,000 hours
• Rated Wattage: 15W
• Lamp current: 118mA
• CRI: >80
• Power Factor: 0.59
• Product Specification Sheet available here 
• In case of breakage, please click here to ensure safe disposal.

Light Bulb - Original LED 002

• 4 Watt
• 245 Lumen
• Equivalent to 25W Incandescent Light bulb
• Lifetime: 10,000 Hours
• Dimmable: Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
• Colour Temperature 2200K (very warm white light)
• Use in dry location only
• >5°C OPERATION
• Not for use in totally enclosed luminaires
• Lamp Dimensions: 163mm x 65mm
• Energy Class: A
• Switching Cycles: > 30,000
• Warm-Up Time: Instant Full Light
• Starting time: Instant on
• Luminous Flux: 245 Lumen
• Lumen Maintenance: > 70% after 6,000 hours
• Rated Wattage: 4W
• Power Factor: > 0.9
• Lamp current: 24mA
• CRI: > 80
• Product Specification Sheet available here

Once your Plumen bulb has reached the end of its lifetime, please click here to learn more about recycling information.